How to Recover Lost Security Code

THIS WILL WORK FOR ALL THE NOKIA BB5 HANDSETS like NOKIA 6120c, NOKIA 5700, NOKIA 6300, NOKIA 6630, and many otherzzz..

Download Nemesis Service Suite from the site mentioned above:

METHOD 1 " TO RECOVER THE CODE

1. CONNECT UR FONE VIA USB CABLE IN PC MODE & INSTALL THE DRIVERS FOR UR CELL FONE PROVIDED WITH NOKIA PC SUITE.THEN EXIT PC SUITE

2. THEN INSTALL Nemesis Service Suite

3. SELECT USB VIRTUAL DRIVE during installation (in case of nokia 6120c for nokia 5700 use diamond protection)

4. AFTER INSTALLATION OPEN IT, THEN CLicK ON SCAN BUTTON

5. AFTER THAT CLicK ON PHONE INFO, NOW CLicK ON SCAN

6. NOW CLicK ON PERMANENT MEMORY TAB given on right bottom of application

7. NOW CLicK ON READ, IT WILL READ THE PERMANENT MEMORY FILE & WRITE IT TO THE DISK

UR PM FILE WILL BE LOCATED IN THE PATH:

D:\Program Files\NSS\Backup\pm\356252*********.pm

open that PM file in NOTEPAD

8. now scroll uptil FIELD [308] and on the 5th RECORD ur security code is saved

like that

5=31303038350000000000 remove all the "3" digits and it will be like that

5= 10085 0000000000 now its 10085 thats it.UR LOCK CODE IS 10085

METHOD 2 TO RESET THE CODE

You need a Data cable that comes with your phone and Nemesis Service Suite(later named as NSS) installed on your PC..

Connect normally turned on phone to the cable and install drivers for it,is asked.
Start NSS and click on magnifier glass - marked with mouse cursor.

When driver and other NSS software informations are displayed,click on big Phone Info (1.) button and then on little Scan (2.) button.If everything is OK you will get message Done! (field marked with arrow).

Now click on big Tools (3.) button,

http://i50.tinypic.com/3011paw.jpg

then on tab Factory Settings (4.)

http://i47.tinypic.com/dewaza.jpg

now here,if you have a Symbian phone then you must check Symbian box (it is above the Reset button marked with 6.),if you have S40 3rd phone then leave Symbian unchecked.
Select User code (5.) if not allready selected and click on Reset (6.) button.
If everything goes well message Done will appear again in that field marked in second picture+those messages in regular information window.

http://i47.tinypic.com/2uxvbbr.jpg

That's it,your Security code is set to factory 12345 again.

—————————————-
Sent from my BlackBerry® wireless device